J.M. NEY COMPANY -- BRAVO  -- 6520-00F011163
<pre>=====================  Product Identification  =====================

Product ID:BRAVO
MSDS Date:01/01/1987
FSC:6520
NIIN:00F011163
=== Responsible Party ===
Company Name:J.M. NEY COMPANY
Address:NEY INDUSTRIAL PARK
City:BLOOMFIELD
State:CT
ZIP:06002
Info Phone Num:(203) 242-2281
Emergency Phone Num:(203) 242-2281
CAGE:FO552
=== Contractor Identification ===
Company Name:J.M. NEY COMPANY
Address:NEY INDUSTRIAL PARK
City:BLOOMFIELD
State:CT
ZIP:06002
Phone:(203) 242-2281
CAGE:FO552
Company Name:NEY J M CO DENTAL DIVISION
Address:NEY INDUSTRIAL PARK
Box:City:BLOOMFIELD
State:CT
ZIP:06002
Country:US
CAGE:6M651

=============  Composition/Information on Ingredients  =============

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 10%
Other REC Limits:1 MG(CU)/M3 (DUST)
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 4.6%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DUST OF TIN OXIDE HAVE
    CAUSED RELATIVELY BENIGN PNEUMOCONOISIS. INGESTION: COPPER EFFECTS
    THE GASTROINTESTINAL TRACT & TIN IS GENERALLY NOT CONSIDERED TOXIC.
    SKIN: BURNS & CUTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DUST OF TIN OXIDE HAVE CAUSED
    RELATIVELY BENIGN PNEUMOCONOISIS. INGESTION: COPPER EFFECTS THE
    GASTROINTESTINAL TRACT & TIN IS GENERALLY NOT CONSIDERED TOXIC.
    SKIN: BURNS & CUTS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF LARGE QUANTITIES OF DUST ARE GENERATED, USE
    INDUSTRIAL VACUUM TO CLEAN UP. MOLTEN METAL SHOULD BE ALLOWED TO
    SOLIDIFY BEFORE CLEAN UP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WEAR PROTECTIVE EQUIPMENT WHEN
    CUTTING, GRINDING, SOLDERING, WELDING, MELTING, MACHINING &
    HANDLING OF NON-FERROUS METALS.
Other Precautions:AVOID CUTS & BURNS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN ACCORDANCE W/NIOSH WHEN CUTTING, GRINDING,
    SOLDERING, & WELDING.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION WHEN GENERATING DUST,
    MIST, & FUMES TO KEEP <TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Appearance and Odor:SOLID METAL,
    WIRE/PLATE/STRIP/INGOTS/NUGGETS/SWITCHES/ELECTRONIC/DENTAL FORM.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF DUSTS USING APPROVED METHODS
    CONSISTANT WITH APPLICABLE LOCAL, STATE, & FEDERAL REGULATIONS.
    MOLTEN METAL SHOULD BE RECLAIMED USING STANDARD INDUSTRIAL
    PRACTICES SUCH AS REMELTING & REFININ G.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.